Vol. 3 No. 2 (2024): Regular Issue

All published articles were authored/co-authored by 22 authors from 5 institutions in 5 countries. The institutions include Universitas Negeri Padang (Indonesia), Universiti Malaysia Pahang Al-Sultan Abdullah (Malaysia), Yangon Technological University (Myanmar), Universidad de Extremadura (Spain) and Al Ain University (United Arab Emirates).

Published: 2024-07-28

Engineering

ELGO electric motorcycle: Design and analysis of trail-type electric motorcycle frame using finite element analysis
Muhammad Fatiy Elmoudi, Machine Construction Laboratory, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Padang, INDONESIA

Delima Yanti Sari, Machine Construction Laboratory, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Padang, INDONESIA

Yufrizal, Machine Construction Laboratory, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Padang, INDONESIA

56-64
- PDF
DOI: https://doi.org/10.58712/jerel.v3i2.129
This article have been read 127 times, downloaded 119 times
Study of the variation of the leading edge of a railway crane on the aerodynamic characteristics
Willy Hardi Vernando, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Indonesia

Andre Kurniawan, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Indonesia

Randi Purnama Putra, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Indonesia

Mirta Widia, Faculty of Industrial Sciences and Technology, Malaysia Centre for Advanced Industrial Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, MALAYSIA

65-72
- PDF
DOI: https://doi.org/10.58712/jerel.v3i2.145
This article have been read 118 times, downloaded 96 times
Experimental investigation of the infill response under the inter-story drift level for different opening location
Hsu Nandar Htun, Department of Civil Engineering, Yangon Technological University, MYANMAR

Khin Su Su Htwe, Department of Civil Engineering, Yangon Technological University, MYANMAR

73-85
- PDF
DOI: https://doi.org/10.58712/jerel.v3i2.155
This article have been read 112 times, downloaded 105 times

Education/training for future generation of engineers

Analysis and control of occupational safety risks using the HIRARC method in the Machining Workshop
Roki Putra Anwar, Departemen of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Padang, INDONESIA

Andre Kurniawan, Departemen of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Padang, INDONESIA

Mulianti, Departemen of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Padang, INDONESIA

Zainal Abadi, Departemen of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Padang, INDONESIA

86-97
- PDF
DOI: https://doi.org/10.58712/jerel.v3i2.142
This article have been read 292 times, downloaded 247 times
Effectiveness of case method learning to optimise students' understanding of industrial mechanical machinery science
Rendy Dwi Putra, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Waskito, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Andril Arafat, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Juan Luis Cabanillas García, Department of Didactics, Organization and Research Methods, Universidad de Extremadura, SPAIN

Firas Tayseer Mohammad Ayasrah, College of Education, Humanities and Science, Al Ain University, UNITED ARAB EMIRATES

Aprilla Fortuna, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

98-108
- PDF
DOI: https://doi.org/10.58712/jerel.v3i2.144
This article have been read 154 times, downloaded 104 times
Implementation of experiential learning method in mechanical drawing course to enhance student understanding through real projects
Ridhollah Nasution, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Arwizet K, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Yolli Fernanda, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

109-126
- PDF
DOI: https://doi.org/10.58712/jerel.v3i2.127
This article have been read 332 times, downloaded 181 times

Vol. 3 No. 2 (2024): Regular Issue

Engineering

ELGO electric motorcycle: Design and analysis of trail-type electric motorcycle frame using finite element analysis

Study of the variation of the leading edge of a railway crane on the aerodynamic characteristics

Experimental investigation of the infill response under the inter-story drift level for different opening location

Education/training for future generation of engineers

Analysis and control of occupational safety risks using the HIRARC method in the Machining Workshop

Effectiveness of case method learning to optimise students' understanding of industrial mechanical machinery science

Implementation of experiential learning method in mechanical drawing course to enhance student understanding through real projects