Vol. 2 No. 3 (2023): Regular Issue

This issue has been available online since 16^th November 2023. All of the published articles were authored/co-authored by 20 authors from 4 institutions in 3 countries. The institutions include Universitas Negeri Padang (Indonesia), Yangon Technological University (Myanmar) and Acharya Institute of Technology (India).

Published: 2023-11-16

Engineering

Optimization of impeller blade number in centrifugal pump for crude oil using Solidworks Flow Simulation
Muhammad Fikhri Aldio, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Waskito Waskito, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Purwantono Purwantono, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Remon Lapisa, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

80-93
- PDF
This article have been read 293 times, downloaded 218 times https://doi.org/10.58712/jerel.v2i3.116
SolidWorks Flow Simulation: Selecting the optimal mesh for conducting CFD analysis on a centrifugal fan
Salmat Salmat, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Delima Yanti Sari, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Yolli Fernanda, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Febri Prasetya, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

94-103
- PDF
This article have been read 229 times, downloaded 135 times https://doi.org/10.58712/jerel.v2i3.104
Design, fabrication and measurement of metal-semiconductor field effect transistor based on zinc oxide material
Hla Myo Tun, Research Department, Yangon Technological University, Yangon, MYANMAR

Rizky Ema Wulansari, Department of Mechanical Engineering, Universitas Negeri Padang, Padang, INDONESIA

Devasis Pradhan, Department of Electronics and Communication Engineering, Acharya Institute of Technology, Bengaluru, INDIA

Zaw Min Naing, Department of Research and Innovation, Ministry of Science and Technology, Yangon, MYANMAR

104-111
- PDF
This article have been read 274 times, downloaded 181 times https://doi.org/10.58712/jerel.v2i3.103

Education/Training of Next-Generation Engineering Students

Optimizing student learning in Computer Numerical Control subject: A comprehensive analysis of influential factors
Muhammad Al Fadri, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Yufrizal A, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Yolli Fernanda, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Febri Prasetya, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

112-119
- PDF
This article have been read 202 times, downloaded 70 times https://doi.org/10.58712/jerel.v2i3.114
Optimizing learning engagement and performance in technical education: Harnessing the power of video tutorials for enhanced motivation and skill development in Shield Metal Arc Welding Subject
M Hafis, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Syahril Syahril, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Refdinal Refdinal, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Febri Prasetya, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

120-128
- PDF
This article have been read 207 times, downloaded 77 times https://doi.org/10.58712/jerel.v2i3.112

Vol. 2 No. 3 (2023): Regular Issue

Engineering

Optimization of impeller blade number in centrifugal pump for crude oil using Solidworks Flow Simulation

SolidWorks Flow Simulation: Selecting the optimal mesh for conducting CFD analysis on a centrifugal fan

Design, fabrication and measurement of metal-semiconductor field effect transistor based on zinc oxide material

Education/Training of Next-Generation Engineering Students

Optimizing student learning in Computer Numerical Control subject: A comprehensive analysis of influential factors

Optimizing learning engagement and performance in technical education: Harnessing the power of video tutorials for enhanced motivation and skill development in Shield Metal Arc Welding Subject