Vol. 2 No. 2 (2023): Regular Issue

All of the published articles were authored/co-authored by 22 authors from 9 institutions in 5 countries. The institutions include Universitas Negeri Padang (Indonesia), National Cheng Kung University (Taiwan), Politeknik Negeri Malang (Indonesia), Universitas Negeri Gorontalo (Indonesia), Universitas Pendidikan Indonesia (Indonesia), Thapar Institute of Engineering and Technology (Deemed to be University) (India), I.V. Panfilov Kazakh-Russian Specialized School-Lyceum (Kazakhstan), Satbayev University (Kazakhstan), and Universiti Tun Hussein Onn Malaysia (Malaysia).

DOI: https://doi.org/10.58712/jerel.v2i2

Published: 2023-07-28

Engineering

Efficiency comparison of fin heatsink models using solidworks thermal analysis
Angga Hermawansyah, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Andre Kurniawan, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Sein Laer Yi Win, Department of Civil Engineering, National Cheng Kung University, TAIWAN

Nanang Qosim, Department of Mechanical Engineering, Politeknik Negeri Malang, INDONESIA

Syamsul Bahri Biki, Department of Management, Faculty of Economics, Universitas Negeri Gorontalo, INDONESIA

Apri Wiyono, Department of Automotive Engineering, Faculty of Engineering, Universitas Pendidikan Indonesia, INDONESIA

43-49
- PDF
DOI: https://doi.org/10.58712/jerel.v2i2.84
This article have been read 1271 times, downloaded 13 times
Finite element analysis of electric motorcycle frame using SolidWorks: A comparative study of circular tube and square tube
Nicolus Obeth Theopilus Simanjuntak, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, INDONESIA

Zeyar Min Thwin Htoo, Department of Geomatics, Disaster Mitigation and Management, National Cheng Kung University, TAIWAN

Mukesh Singh, Department of Electrical and Instrumentation Engineering, Thapar Institute of Engineering and Technology (Deemed to be University), INDIA

50-55
- PDF
DOI: https://doi.org/10.58712/jerel.v2i2.46
This article have been read 1014 times, downloaded 306 times
Installation of gussets to reduce stress on the junction between the arm and bridge on the swing arm
Nailul Hidayat, Department of Mechanical Engineering, Universitas Negeri Padang, INDONESIA

Yufrizal A, Department of Mechanical Engineering, Universitas Negeri Padang, INDONESIA

Hendri Nurdin, Department of Mechanical Engineering, Universitas Negeri Padang, INDONESIA

Farid Kassimov, I.V. Panfilov Kazakh-Russian Specialized School-Lyceum, KAZAKHSTAN

Elnar Kenzhaliyev, JSC Institute of Metallurgy and Ore Beneficiation, Satbayev University, KAZAKHSTAN

56-62
- PDF
DOI: https://doi.org/10.58712/jerel.v2i2.75
This article have been read 613 times, downloaded 124 times
Study on U hull modifications with concave design to improve the tourist ship stability
Syahril Syahril, Department of Mechanical Engineering, Universitas Negeri Padang, INDONESIA

Rahmat Azis Nabawi, Department of Mecahnical Engineering, Universitas Negeri Padang, INDONESIA

Aulia Zulkarnaen Nasty, Department of Mecahnical Engineering, Universitas Negeri Padang, INDONESIA

63-69
- PDF
DOI: https://doi.org/10.58712/jerel.v2i2.96
This article have been read 527 times, downloaded 65 times

Education/Training of Next-Generation Engineering Students

Teaching activities for supporting students’ 4cs skills development in vocational education
Nizwardi Jalinus, Vocational Research Centre, Universitas Negeri Padang, INDONESIA

Sukardi Sukardi, Vocational Research Centre, Universitas Negeri Padang, INDONESIA

Rizky Ema Wulansari, Vocational Research Centre, Universitas Negeri Padang, INDONESIA

Yee Mei Heong, Fakulti Pendidikan Teknikal dan Vokasional, Universiti Tun Hussein Onn Malaysia, MALAYSIA

Tee Tze Kiong, Fakulti Pendidikan Teknikal dan Vokasional, Universiti Tun Hussein Onn Malaysia, MALAYSIA

70-79
- PDF
DOI: https://doi.org/10.58712/jerel.v2i2.95
This article have been read 805 times, downloaded 382 times

Vol. 2 No. 2 (2023): Regular Issue

Engineering

Efficiency comparison of fin heatsink models using solidworks thermal analysis

Finite element analysis of electric motorcycle frame using SolidWorks: A comparative study of circular tube and square tube

Installation of gussets to reduce stress on the junction between the arm and bridge on the swing arm

Study on U hull modifications with concave design to improve the tourist ship stability

Education/Training of Next-Generation Engineering Students

Teaching activities for supporting students’ 4cs skills development in vocational education